How to configure Unifi UDM PRO VPN for Windows 10

How to configure Unifi UDM PRO VPN for Windows 10

👨‍💻

In this tutorial I will show you how to configure Unifi UDM Pro VPN for Windows 10. I will take you through the VPN and VPN VLAN user configuration processes on Unifi Console version 6.1.71 of UDM Pro and then finish with Windows VPN Client Configuration.

Advanced VPN Configuration: How to Configure Windows Server and UDM-PRO UniFi Controller to Access RADIUS VPN

Once you are logged into your UDM PRO, follow these steps.

1. Click Settings
2. Click Advanced Options
3. Scroll down to radius
4. Locate default radius server. On the right side click dot burger and click initialization.
5. Once the page is loaded Turn the switch to blue.
6. write in file Secret. you can use simple password generator to create one.
7. No need to change anything in the RADIUS Settings section.
8. sought RADIUS USERS.
9. Click Create a new RADIUS user

10. Fill out the form. write in VLAN ID that you want to use. In my case the VLAN ID will be 25. We will configure this VPN VLAN in a moment.
11. Select the dropdown menu for the tunnel type and select: 3 – Layer Two Tunneling Protocol (L2TP)
12. Select the dropdown menu for the medium tunnel type and select: 1 – IPv4 (IP version 4)
13. Click the blue button [Create User] button.
14. Click the blue button [Apply Changes] Button at the bottom to save everything.
15. Now we’re ready to move on to creating a VPN!
16. Click Settings
17. Click Networks

18. Click Add a new network button
19. Give your new network a name, EX:VPN.
20. Expand VPN Settings, after that click on the dropdown menu and select remote user.
21. Enter a pre-shared key. End users will need to use this key as well.
22. Let’s move on to the gateway / subnet. I personally prefer matching the third octet with the VLAN ID number. In my case I am using VLAN ID 25 so I will change my subnet to 192.168.25.1/24.

23. change your IP pool range to accommodate users.
24. Skip steps 25 and 26 if you don’t have it Internal DNS server / domain controller.
25. If you have a file Internal DNS server/domain controller You will want to change server name. Click on the drop down menu, Automatic change to manual.
26. Just enter your IP addresses Internal DNS server / domain controller.
27. Now you are done Click the blue button [ Add Network ] button to save everything.
28. You can now set up a VPN connection on your Windows 10 PC using the credentials you created.

Note: By default, all network VLANs communicate with each other.

How to configure Windows VPN Client

1. On the Windows 10 search bar, Search for a vpn.
2. Click VPN settings.
3. Once the VPN window opens, click Add a VPN connection.
4. Next, fill in the information you created on UDM Pro while setting up the VPN user. I’ve lit up in red what to select in the drop down windows.
5. You can now successfully Connection to your VPN.

If you are getting the error “Connection is blocked due to the policy configured on your RAS/VPN server.” Click here: How to solve Unifi VPN Access RAS / VPN Server Error for Windows 10

[ad_1]
Don’t forget to share this post with friends !