How to set up a VPN server in Windows Server 2008 R2
/
Setting up a pptp VPN server in Windows Server 2008 is a relatively simple and trivial task. Pptp VPNs are definitely very useful when you need to quickly allow users into your network, and despite being less secure, pptp vpn servers are easy to install and configure compared to ipsec vpn servers. The setting has been slightly changed from 2003 to 2008. Now RRAS must be added using Server Manager as a “role” using Server Manager. In this tutorial, I will walk you through the installation. Before we start our project, I advise that if you want to setup a fast pptp vpn server at home, the best way to do it, in my work, is to use a home router instead of having a computer that is always power consuming. If you want to know how to do that, read my article: Setting up a VPN with DD-WRT.
instructions
Install all VPN server related services
to open “server manager“.
In the top menu, click “a job” And “Add roles“.
This will bring up the role installation wizard. On the first screen titled “before you startRead the requirements and clicknext oneto complete.
After that, on the screen titled “Select server roles, put a check mark onNetwork Policy and Access Servicesand click onnext oneto complete.
On the third screen titled “Network Policy and Access ServicesRead it and clicknext oneto complete.
On the next screen entitledSelect role servicesCheckmarkRouting and remote access services“make sure”remote access service” And “routingWell. Clicknext one“to complete”.
After that, on the screen titled “Confirm the installation selectionYou will get a summary of everything that will be installed. Make sure everything looks good and click onInstallationsbutton. Once the installation is finished, clickNearbyTo finish the wizard.
Back on the main Server Manager window, right-click on “Configure and enable Routing and Remote Access“.
This will show “Routing and Remote Access WizardIn the first window, clicknext one“.
In the second window, select “custom configurationand click onnext oneto complete.
Next, put a checkmark on “VPN accessand click onnext oneto complete.
On the last screen of the wizard, tap “finishThen clickstart serviceIn the next window that will pop up.
Once the process is completed, and you are back in the main Server Manager window, Remote access and routing should now be turned on.
Open Ports on the Firewall
To open PPTP:
Harbor 1723 TCP
Harbor 47 grams
Give domain users access to a VPN
If you are on a domain, go to your domain server, and click on “Begins“,”All programs“,”Administrative Tools“,”Active Directory Users and Computers“.
In the left column, find your domain users. Double-click on the user you want to give access to. This will bring up the properties for this user. Click on “calltab and underNetwork access permission” Determine “allow passClickProgressing” And “OK” to end.
Repeat the same process for all users on your network that you want to give the VPN access to. This is so simple!
[ad_1]
Don’t forget to share this post with friends !
