Windows Setup Guide – Windscribe
🖥️
This is the simplest and safest option.
I bought 1
Get an IKEv2 profile and credentials (Pro account required).
I bought 2
Open Windows PowerShell (Start → type “Powershell”)
I bought 3
Execute the following command in Powershell, replacing SERVER.WINDSCRIBE.COM With the site you chose from step 1.
Add-VpnConnection -Name “Windscribe IKEv2” -ServerAddress “SERVER.WINDSCRIBE.COM” -TunnelType “Ikev2” -RememberCredential -AuthenticationMethod EAP -EncryptionLevel Max
I bought 4
Execute the following command in Powershell to use strong encryption.
Set-VpnConnectionIPsecConfiguration -ConnectionName “Windscribe IKEv2” -AuthenticationTransformConstants GCMAES256 -CipherTransformConstants GCMAES256 -EncryptionMethod AES256 -IntegrityCheckMethod SHA256 -DHGfroup
I bought 5
Go to Start, type “Settings” and select “Network & Internet” and choose the “VPN” tab.
I bought 6
Click “Connect”
I bought 7
Enter your username and password as provided on the Profile Generator page in Step 1. This username and password will not be the same as logging in to Windscribe.
This is the most complicated and least secure option.
I bought 1
Get an IKEv2 profile and credentials (Pro account required).
I bought 2
From the Windows 10 Start Menu, click Settings
I bought 3
In the Windows Settings window, click Network and the Internet
I bought 4
Click VPN.
I bought 5
tap on Add a VPN connection Button to set up a new VPN connection.
It is much more important to create a new VPN connection profile than to edit an existing one, because it will not work due to an error in Windows.
I bought 6
Select “Windows (built-in)” as the VPN provider, enter the connection name (any name you want), select the “Auto” VPN type. Select the type of login information “Username and Password”.
Then enter the server address, username, and password as shown on the Profile Generator page in Step 1. This username and password will not be the same as logging in to Windscribe.
I bought 7
Go to Control Panel -> Network and Internet -> Network Connections. Select the adapter you just created and click “Properties”
I bought 8
Change the VPN type to “IKEv2”.
Change the data encryption to “Maximum Encryption Strength”.
I bought 9
Go to the Networking tab, select Network Protocol Version 4, and then click Properties.
I bought 10
Click the “Advanced” button.
I bought 11
Make sure “Use default gateway on remote network” is checked. Then click OK. Now repeat the above steps for “Network Protocol Version 6”
I bought 7
Click on the profile you just created, and click Connection button to call.
[ad_1]
Don’t forget to share this post with friends !